What are the general precautions for Sheet Metal Fabrication Manufacturer?

Safety is of paramount importance, and life is only once. Sheet Metal Fabrication Manufacturer not only pays attention to the safety of employees when operating, but also has corresponding precautions when operating equipment.

In terms of materials: In sheet metal processing, you should pay attention to reducing energy consumption as much as possible. Of course, for an operation, the task, reducing the amount of sheet metal investment has little effect on the cost recovery, so it is about a large amount of long-term processing If we can shorten investment and loss as the main purpose, we can reduce more expenses for manufacturers and bring more economic benefits to manufacturers.

Sheet Metal Fabrication

Technical aspects: During Sheet Metal Fabrication, in order to achieve the purpose of reducing investment, workers are required to strictly follow the consumption standards to complete the work process. Before each processing, the application needs to stop reviewing the application status of the data. Ability to stop processing at will. Many of the processing industry's costs are due to the lack of good data before processing, so the staff must first understand the types of processing data, check the specifications and models of the data, and make good preparations to prevent errors during processing. It can also reduce the amount of waste, and workers should pay attention to these issues during processing.

To measure the quality of a sheet metal processing plant, first, first look at the incomplete equipment; second, look at the skills of its operators; third, look at the order of the processes.

First, TOX riveting

The connected piece is pressed into the female die through a simple male die. Under further pressure, the data in the die is "moved" outward. The result is a round joint with no sharp edges and no burrs, and it will not affect its corrosion resistance. Even the externally plated or spray-painted plates can also retain the original anti-rust and anti-corrosion characteristics. The paint layer also deforms with it. The material is squeezed to both ends, into the plate on the side of the die, and then forms a TOX connection dot.

Rivet riveting

This kind of rivet is often called rivet, and riveting two plates together are called rivet.

Third, hole riveting

One part in the middle is a drawing hole, and the other part is a counterbore. After being riveted, it becomes an inseparable joint. Superiority: The sinking hole with which the hole is matched has the positioning function itself. The riveting strength is high, and the riveting efficiency through the mold is also higher.

Let ’s continue to share the bending and forming of the sheet metal: Metal Bending and forming are performed on a bending machine. Place the plate to be formed on the bending machine, use the lifting lever to lift the brake pads, and slide the workpiece to an appropriate position. The brake pad is then lowered onto the sheet to be formed, and the bending of the metal is achieved by applying force to the bending lever on the bending machine.