How to carry out the inspection of metal stamping

Metal stamping inspection is very important. Next, we will share many years of experience and hope it will help.

1, Touch test. First wipe the surface with gauze, then contact the inspector with gloves, and press it along the longitudinal direction.

2, The flexible mesh mill. After cleaning the surface of the gauze, the surface of the pressing sand is then pressed by the flexible net, and the whole surface is grinded along the longitudinal surface to check whether there is pock mark or surface indentation.

3, Test oil. After cleaning the gauze and filling the whole surface, keep the direction of the oil consistent. Light after the inspection, such as pits, corrugated etc.

We can also supply the Sheet Metal Bending Parts, Nonstandard Metal Parts etc. Welcome to contact us.