Six Measures To Prevent Damage To Hardware Accessories

Causes of hardware damage: improper selection of hardware accessories, poor quality; no metal liner when tightening, not enough installation strength. There are six aspects to prevent damage to hardware accessories:

Measures to prevent damage to hardware components: To install hardware with fastening screws, a metal lining must be built in. The thickness of the lining should be at least twice the distance of the fastener. Do not fasten to plastic profiles or use non-metallic linings.

Measures for the prevention of damage to hardware accessories: For sliding windows with a width of more than 1 m, or for doors and windows with double glazing, double pulleys or rolling pulleys should be used.

Measures for the prevention of damage to hardware accessories: The type, specification and performance of the hardware accessories shall be in accordance with the current national standards and relevant regulations, and shall be matched with the selected plastic doors and windows.

Measures for the prevention of damage to hardware accessories: Hardware accessories should be installed at the end. Door and window locks, handles, etc. should be assembled after the window door is inserted into the frame to ensure correct position and flexible switch.

Measures to prevent damage to hardware accessories: 5: After hardware installation, pay attention to maintenance to prevent rust and corrosion. In daily use, it is necessary to lightly open and close the door to prevent hard opening and damage.

Measures for the prevention of damage to hardware components: The sliding hinges shall not be made of aluminum alloy and shall be made of stainless steel.

We have Metal Packing Box Sheet, Powder Coating Steel Bracket and other hardware accessories for you. If you want to know more about hardware accessories, you can follow us, we are Nonstandard Metal Parts Suppliers.