Stamping Mould Assembly Considerations

After the various parts of the stamping die are finished, they can enter the final assembly stage. Due to the high precision and small error of the parts of the mold, in addition to accurate positioning in time, it is necessary to arrange the correct installation sequence to ensure the normal operation of the stamping die. As an Auto Stamping Parts Exporter, let's talk to you.

First, the upper and lower mold bases of the stamping die are installed. The upper mold base is mounted on the punch of the punch or press, and the lower mold base is mounted on the work surface of the punch or press. After the upper and lower mold bases are fixed, the mold parts can be mounted on the mold base to ensure correct and accurate installation position, so as to avoid the error and the mold can not work normally.

When installing the concave-convex mold, a uniform blanking gap is required to ensure the stamping quality and extend the service life of the stamping die. The assembly sequence of the upper and lower molds should be determined according to the mold structure. Different installation methods are determined for the mold installation with and without guide columns. For complex Stamping Mould installations, a reasonable assembly sequence is determined based on the size of the upper and lower mold parts. Sometimes the improper installation sequence not only affects the subsequent installation work but also may not be installed, so the correct installation sequence is essential.